Selection of publications made with the state-of-the-art electrospinning equipment from IME.

Publications 2020

Knapczyk-Korczak, J., Ura, D., Gajek, M., Marzec, M. M., Berent, K., Bernasik, A., … Stachewicz, U. (2020). Fiber-Based Composite Meshes with Controlled Mechanical and Wetting Properties for Water Harvesting. ACS Applied Materials & Interfaces, DOI: 10.1021/acsami.9b19839

Smeets, A., Koekoekx, R., Ruelens, W., Smet, M., Clasen, C., & Mooter, G. Van den. (2020). Gastro-resistant encapsulation of amorphous solid dispersions containing darunavir by coaxial electrospraying. International Journal of Pharmaceutics, 118885. DOI: 10.1016/j.ijpharm.2019.118885

Publications 2019

Nagam Hanumantharao, S., Alinezhadbalalami, N., Kannan, S., Friske, M., & Rao, S. (2019). Electrospun acellular scaffolds for mimicking the natural anisotropy of the extracellular matrix. RSC Advances, 9(69), 40190–40195. DOI: 10.1039/C9RA07777D

Smeets, A., Lo Re, I., Clasen, C., & Van den Mooter, G. (2019). Fixed dose combinations for cardiovascular treatment via coaxial electrospraying: coated amorphous solid dispersion particles. International Journal of Pharmaceutics, 118949. DOI: 10.1016/j.ijpharm.2019.118949

Koekoekx, R., Zawacka, N. C., Van den Mooter, G., Hens, Z., & Clasen, C. (2019). Electrospraying the Triblock Copolymer SEBS: The Effect of Solvent System and the Embedding of Quantum Dots. Macromolecular Materials and Engineering, 1900658. DOI: 10.1002/mame.201900658

Roshanbinfar, K., Vogt, L., Ruther, F., Roether, J. A., Boccaccini, A. R., & Engel, F. B. (2019). Nanofibrous Composite with Tailorable Electrical and Mechanical Properties for Cardiac Tissue Engineering. Advanced Functional Materials, 1908612. DOI: 10.1002/adfm.201908612

Mu’min, M. S., Böhm, T., Moroni, R., Zengerle, R., Thiele, S., Vierrath, S., & Breitwieser, M. (2019). Local hydration in ionomer composite membranes determined with confocal Raman microscopy. Journal of Membrane Science. DOI: 10.1016/j.memsci.2019.05.032

Aydin, A., Sun, L., Gong, X., Russell, K. J., Carter, D. J., & Gordon, R. G. (2019). Strong, Long, Electrically Conductive and Insulated Coaxial Nanocables. ACS Applied Polymer Materials. DOI: 10.1021/acsapm.9b00286

Putti, M., de Jong, S. M. J., Stassen, O., Sahlgren, C. M., & Dankers, P. Y. W. (2019). A supramolecular platform for the introduction of Fc-fusion bioactive proteins on biomaterial surfaces. ACS Applied Polymer Materials, DOI: 10.1021/acsapm.9b00334

Reid, J. A., & Callanan, A. (2019). Influence of aorta extracellular matrix in electrospun polycaprolactone scaffolds. Journal of Applied Polymer Science. DOI: 10.1002/app.48181

Nirwan, V. P., Al-Kattan, A., Fahmi, A., Kabashin, A. V., Nirwan, V. P., Al-Kattan, A., … Kabashin, A. V. (2019). Fabrication of Stable Nanofiber Matrices for Tissue Engineering via Electrospinning of Bare Laser-Synthesized Au Nanoparticles in Solutions of High Molecular Weight Chitosan. Nanomaterials, 9(8), 1058. DOI: 10.3390/nano9081058

Buschmann, J., Yamada, Y., Schulz-Schönhagen, K., Hess, S. C., Stark, W. J., Opelz, C., … Jungraithmayr, W. (2019). Hybrid nanocomposite as a chest wall graft with improved integration by adipose-derived stem cells. Scientific Reports, 9(1), 10910. DOI: 10.1038/s41598-019-47441-9

Reid, J. A., & Callanan, A. (2019). Hybrid cardiovascular sourced extracellular matrix scaffolds as possible platforms for vascular tissue engineering. Journal of Biomedical Materials Research Part B: Applied Biomaterials, DOI: 10.1002/jbm.b.34444

Şelaru, A., Drăgușin, D.-M., Olăreț, E., Serafim, A., Steinmüller-Nethl, D., Vasile, E., … Dinescu, S. (2019). Fabrication and Biocompatibility Evaluation of Nanodiamonds-Gelatin Electrospun Materials Designed for Prospective Tissue Regeneration Applications. Materials, 12(18), 2933. DOI: 10.3390/ma12182933

Unalan, I., Endlein, S. J., Slavik, B., Buettner, A., Goldmann, W. H., Detsch, R., & Boccaccini, A. R. (2019). Evaluation of Electrospun Poly(ε-Caprolactone)/Gelatin Nanofiber Mats Containing Clove Essential Oil for Antibacterial Wound Dressing. Pharmaceutics, 11(11), 570. DOI: 10.3390/pharmaceutics11110570

Wissing, T. B., van Haaften, E. E., Koch, S. E., Ippel, B. D., Kurniawan, N. A., Bouten, C. V. C., & Smits, A. I. P. M. (2019). Hemodynamic loads distinctively impact the secretory profile of biomaterial-activated macrophages – implications for in situ vascular tissue engineering. Biomaterials Science. DOI: 10.1039/C9BM01005J

Vomero, M., Gueli, C., Zucchini, E., Fadiga, L., Erhardt, J. B., Sharma, S., & Stieglitz, T. (2019). Flexible Bioelectronic Devices Based on Micropatterned Monolithic Carbon Fiber Mats. Advanced Materials Technologies, 1900713. DOI: 10.1002/admt.201900713

Lobo, A. O., Muniz, E. C., Zhao, X., & Boccaccini, A. R. (2019). Physical and Antibacterial Properties of Peppermint Essential Oil Loaded Poly (ε-caprolactone) (PCL) Electrospun Fiber Mats for Wound Healing. Frontiers in Bioengineering and Biotechnology | Www.Frontiersin.Org, 1, 346. DOI: 10.3389/fbioe.2019.00346

Ura DP, Karbowniczek JE, Szewczyk PK, Metwally S, Kopyściański M, Stachewicz U, Ura DP, Karbowniczek JE, Szewczyk PK, Metwally S, Kopyściański M, Stachewicz U. Cell Integration with Electrospun PMMA Nanofibers, Microfibers, Ribbons, and Films: A Microscopy Study. Bioengineering. 2019 May 9;6(2):41. DOI: 10.3390/bioengineering6020041

Tamimi EA, Ardila DC, Ensley BD, Kellar RS, Vande Geest JP. Computationally Optimizing the Compliance of Multilayered Biomimetic Tissue Engineered Vascular Grafts. J Biomech Eng. 2019 Apr 22;141(6):061003. DOI: 10.1115/1.4042902

Vogt L, Rivera LR, Liverani L, Piegat A, El Fray M, Boccaccini AR. Poly(ε-caprolactone)/poly(glycerol sebacate) electrospun scaffolds for cardiac tissue engineering using benign solvents. Mater Sci Eng C. 2019 Apr 30; DOI: 10.1016/J.MSEC.2019.04.091

Wissing TB, Bonito V, van Haaften EE, van Doeselaar M, Brugmans MMCP, Janssen HM, Bouten CVC, Smits AIPM. Macrophage-Driven Biomaterial Degradation Depends on Scaffold Microarchitecture. Front Bioeng Biotechnol. 2019 Apr 26;7:87. DOI: 10.3389/fbioe.2019.00087

Grant R, Hallett J, Forbes S, Hay D, Callanan A. Blended electrospinning with human liver extracellular matrix for engineering new hepatic microenvironments. Sci Rep. 2019 Dec 18;9(1):6293. DOI: 10.1038/s41598-019-42627-7

Hanumantharao SN, Que C, Rao S. Self-Assembly of 3D Nanostructures in Electrospun Polycaprolactone-Polyaniline Fibers and their Application as Scaffolds for Tissue Engineering. Materialia. 2019 Mar 19;100296. DOI: 10.1016/J.MTLA.2019.100296

Selatile MK, Ray SS, Ojijo V, Sadiku R. Correlations between Fibre Diameter, Physical Parameters, and the Mechanical Properties of Randomly Oriented Biobased Polylactide Nanofibres. Fibers Polym. 2019 Jan 15;20(1):100–12. DOI: 10.1007/s12221-019-8262-z

Liverani L, Raffel N, Fattahi A, Preis A, Hoffmann I, Boccaccini AR, Beckmann MW, Dittrich R. Electrospun patterned porous scaffolds for the support of ovarian follicles growth: a feasibility study. Sci Rep. 2019 Feb 4;9(1):1150. DOI: 10.1038/s41598-018-37640-1

de Oliveira Santos RP, Ramos LA, Frollini E. Cellulose and/or lignin in fiber-aligned electrospun PET mats: the influence on materials end-properties. Cellulose. 2019 Jan 3;1–14. DOI: 10.1007/s10570-018-02234-7

Publications 2018

Rashidi H, Luu N-T, Alwahsh SM, Ginai M, Alhaque S, Dong H, Tomaz RA, Vernay B, Vigneswara V, Hallett JM, Chandrashekran A, Dhawan A, Vallier L, Bradley M, Callanan A, Forbes SJ, Newsome PN, Hay DC. 3D human liver tissue from pluripotent stem cells displays stable phenotype in vitro and supports compromised liver function in vivo. Arch Toxicol. 2018 Aug 28;1–13. DOI: 10.1007/s00204-018-2280-2

Szewczyk PK, Knapczyk-Korczak J, Ura DP, Metwally S, Gruszczyński A, Stachewicz U. Biomimicking wetting properties of spider web from Linothele megatheloides with electrospun fibers. Mater Lett. 2018 Dec 15;233:211–4. DOI: 10.1016/J.MATLET.2018.09.007

Reis KP, Sperling LE, Teixeira C, Paim Á, Alcântara B, Vizcay-Barrena G, Fleck RA, Pranke P. Application of PLGA/FGF-2 coaxial microfibers in spinal cord tissue engineering: an in vitro and in vivo investigation. Regen Med. 2018 Oct 5;rme-2018-0060. DOI: 10.2217/rme-2018-0060

Dugyala VR, Reddy NK, Fransaer J, Clasen C. Self-propulsion of bent bimetallic Janus rods. J Phys D Appl Phys. 2018 Oct 9; DOI: 10.1088/1361-6463/aae6f6

Sustersic T, Liverani L, Boccaccini AR, Savic S, Janicijevic A, Filipovic N. Numerical simulation of electrospinning process in commercial and in-house software PAK. Mater Res Express. 2018 Oct 24; DOI: 10.1088/2053-1591/aaeb08

Ippel BD, Keizer HM, Dankers PYW. Supramolecular Antifouling Additives for Robust and Efficient Functionalization of Elastomeric Materials: Molecular Design Matters. Adv Funct Mater. 2018 Nov 14;1805375. DOI: 10.1002/adfm.201805375

van Kelle MAJ, Oomen PJA, Janssen-van den Broek WJT, Lopata RGP, Loerakker S, Bouten CVC. Initial scaffold thickness affects the emergence of a geometrical and mechanical equilibrium in engineered cardiovascular tissues. J R Soc Interface. 2018 Nov 14;15(148):20180359. DOI: 10.1098/rsif.2018.0359

Vashaghian M, Diedrich CM, Zandieh-Doulabi B, Werner A, Smit TH, Roovers J-P. Gentle cyclic straining of human fibroblasts on electrospun scaffolds enhances their regenerative potential. Acta Biomater. 2018 Nov 22; DOI: 10.1016/J.ACTBIO.2018.11.034

Metwally S, Karbowniczek JE, Szewczyk PK, Marzec MM, Gruszczyński A, Bernasik A, Stachewicz U. Single-Step Approach to Tailor Surface Chemistry and Potential on Electrospun PCL Fibers for Tissue Engineering Application. Adv Mater Interfaces. 2018 Nov 23;1801211. DOI: 10.1002/admi.201801211

Busolo T, Ura DP, Kim SK, Marzec MM, Bernasik A, Stachewicz U, Kar-Narayan S. Surface potential tailoring of PMMA fibers by electrospinning for enhanced triboelectric performance. Nano Energy. 2018 Dec; DOI: 10.1016/j.nanoen.2018.12.037

Bonito V, de Kort B, Bouten C, Smits A. Cyclic Strain affects Macrophage Cytokine Secretion and ECM turnover in Electrospun Scaffolds. Tissue Eng Part A. 2018 Dec 26; DOI: 10.1089/ten.TEA.2018.0306

Formica FA, Barreto G, Zenobi-Wong M. Cartilage-targeting dexamethasone prodrugs increase the efficacy of dexamethasone. J Control Release. 2018 Dec 17; DOI: 10.1016/J.JCONREL.2018.12.025

Szewczyk PK, Metwally S, Karbowniczek JE, Marzec MM, Stodolak E, Gruszczynski A, Bernasik A, Stachewicz U. Surface potential controlled cells proliferation and collagen mineralization on electrospun polyvinylidene fluoride (PVDF) fibers scaffolds for bone regeneration. ACS Biomater Sci Eng. 2018 Dec 20; DOI: 10.1021/acsbiomaterials.8b01108

Szewczyk P, Ura D, Metwally S, Knapczyk-Korczak J, Gajek M, Marzec M, Bernasik A, Stachewicz U, Szewczyk PK, Ura DP, Metwally S, Knapczyk-Korczak J, Gajek M, Marzec MM, Bernasik A, Stachewicz U. Roughness and Fiber Fraction Dominated Wetting of Electrospun Fiber-Based Porous Meshes. Polymers 2018 Dec 27;11(1):34. DOI: 10.3390/polym11010034

Alnuman N, Al-Jafary R, Manna F, Almuhtaseb R. Fabrication and Characterization of Electrospun 75:25 PLGA Nanofibers for Skin Tissue Engineering. In: 2018 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES). IEEE; 2018. p. 560–5. DOI: 10.1109/IECBES.2018.8626606

Bonito V., Smits A.I.P.M., Goor O.J.G.M., Ippel, B.D., Driessen-Mol A., Münker T.J.A.G., Bosman, A.W., Mes, T., Dankers, P.Y.W., Bouten, C.V.C. “Modulation of Macrophage Phenotype and Protein Secretion via Heparin-IL-4 Functionalized supramolecular Elastomers.” Acta Biomaterialia 71 (2018): 247–60. DOI: 10.1016/j.actbio.2018.02.032

Vogt L., Liverani L., Roether J., and Aldo Boccaccini. “Electrospun Zein Fibers Incorporating Poly(glycerol Sebacate) for Soft Tissue Engineering.” Nanomaterials 8, no. 3 (2018): 150. DOI: 10.3390/nano8030150

La Francesca S., Aho J.M., Barron M.R., Blanco E.W., Soliman S., Kalenjian L., Hanson A.D., Todorova E., Marsh M., Burnette K., DerSimonian H., Robert D.O., Wigle, D. A., “Long-Term Regeneration and Remodeling of the Pig Esophagus after Circumferential Resection Using a Retrievable Synthetic Scaffold Carrying Autologous Cells.” Scientific Reports 8, no. 1 (2018): 4123. DOI: 10.1038/s41598-018-22401-x

Popov A.A., Al-Kattan A., Nirwan V.P., Munnier E., Tselikov G.I., Ryabchikov Y.V., Chourpa I., Fahmi A., Kabashin A.V. “Bare Laser-Synthesized Si Nanoparticles as Functional Elements for Chitosan Nanofiber-Based Tissue Engineering Platforms.” In Synthesis and Photonics of Nanoscale Materials XV, edited by Andrei V. Kabashin, Jan J. Dubowski, David B. Geohegan, and Linyou Cao, 10521:9. SPIE, 2018. DOI: 10.1117/12.2295196

Filipe E.C, Santos M., Hung J., Lee B.S.L., Yang N., Chan A.H.P., Ng M.K.C., Rnjak-Kovacina J., and Steven G. Wise. “Rapid Endothelialization of Off-the-Shelf Small Diameter Silk Vascular Grafts.” JACC: Basic to Translational Science 3, no. 1 (2018): 38–53. DOI: 10.1016/j.jacbts.2017.12.003

Dos Santos D.M., Leite I.S., Bukzem A.L., Santos R.P.O., Frollini E., Inada N.M., and Campana-Filho S.P. “Nanostructured Electrospun Nonwovens of Poly(ε-Caprolactone)/quaternized Chitosan for Potential Biomedical Applications.” Carbohydrate Polymers 186 (April 2018): 110–21. DOI: 10.1016/j.carbpol.2018.01.045.

Jauregui C., Yoganarasimha S., and Madurantakam P. “Mesenchymal Stem Cells Derived from Healthy and Diseased Human Gingiva Support Osteogenesis on Electrospun Polycaprolactone Scaffolds.” Bioengineering 5, no. 1 (2018): 8. DOI: 10.3390/bioengineering5010008

Jiang S, Ma B.C., Huang W., Kaltbeitzel A., Kizisavas G., Crespy D., Zhang K.A.I., Landfester K.. “Visible light active nanofibrous membrane for antibacterial wound dressing.” Nanoscale Horizons 3(4) (2018): 439–446. DOI: 10.1039/C8NH00021B

Grant, R., Hay, D., Callanan, A. “From scaffold to structure: the synthetic production of cell derived extracellular matrix for liver tissue engineering.” Biomedical Physics & Engineering Express. (2018): DOI:10.1088/2057-1976/aacbe1

Burton T.P., Callanan A. “A Non-woven Path: Electrospun Poly(lactic acid) Scaffolds for Kidney Tissue Engineering.” Tissue Engineering and Regenerative Medicine 15(3) (2018):301–310. DOI: 10.1007/s13770-017-0107-5

Smeets A., Koekoekx R., Clasen C., Van den Mooter G. “Amorphous solid dispersions of darunavir: Comparison between spray drying and electrospraying.” European Journal of Pharmaceutics and Biopharmaceutics 130 (2018): 96–107. DOI: 10.1016/j.ejpb.2018.06.021

Kandas I., Shehata, N., Hassounah I., Sobolčiak P. “Optical fluorescent spider silk electrospun nanofibers with embedded cerium oxide nanoparticles.” Journal of Nanophotonics 12(02) (2018): 1. DOI:10.1117/1.JNP.12.026016

Bachtin K., Kramer D., Chakravadhanula V.S.K., Mu X., Trouillet V., Kaus M., Indris S., Ehrenberg H., Roth C. “Activation and degradation of electrospun LiFePO 4 battery cathodes.” Journal of Power Sources, 396 (2018): 386–394. DOI: 10.1016/j.jpowsour.2018.06.051

Thakkar S.H., Di Luca A, Zaccaria S., Baaijens F.P.T., Bouten C.V.C., Dankers P.Y.W. “Dual Electrospun Supramolecular Polymer Systems for Selective Cell Migration.” Macromolecular Bioscience, 18(7) (2018): 1800004. DOI :10.1002/mabi.201800004

Passos de Oliveira Santo, R., Fernanda Rossi P., Ramos L., Frollini E. “Renewable Resources and a Recycled Polymer as Raw Materials: Mats from Electrospinning of Lignocellulosic Biomass and PET Solutions.” Polymers 10(5) (2018): DOI: 10.3390/polym10050538

Yang J., Wang Y., Luo J., Chen L. “Highly nitrogen-doped graphitic carbon fibers from sustainable plant protein for supercapacitor.” Industrial Crops and Products 121 (2018): 226–235. DOI: 10.1016/j.indcrop.2018.05.013

Yang J., Wang Y., Luo J., Chen L. “Facile Preparation of Self-Standing Hierarchical Porous Nitrogen-Doped Carbon Fibers for Supercapacitors from Plant Protein–Lignin Electrospun Fibers.” ACS Omega 3(4) (2018): 4647–4656. DOI : 10.1021/acsomega.7b01876

Tan, R.P., Chan A.H.P., Lennartsson K., Miravet M.M., Lee B.S.L., Rnjak-Kovacina J., Clayton Z.E., Cooke, J.P., Ng M.K.C., Patel S., Wise S.G. “Integration of induced pluripotent stem cell-derived endothelial cells with polycaprolactone/gelatin-based electrospun scaffolds for enhanced therapeutic angiogenesis.” Stem Cell Research & Therapy 9(1) (2018): 70. DOI: 10.1186/s13287-018-0824-2

Publications 2017

Ruiter FAA, Alexander C, Rose FRAJ, Segal JI. A design of experiments approach to identify the influencing parameters that determine poly-D,L-lactic acid (PDLLA) electrospun scaffold morphologies. Biomed Mater. 2017 Sep 25;12(5): DOI: 10.1088/1748-605X/aa7b54

Burton T.P., Corcoran A., Callanan A. “The effect of electrospun polycaprolactone scaffold morphology on human kidney epithelial cells.” Biomedical Materials 13(1) (2017): 015006. DOI: 10.1088/1748-605X/aa8dde

Jiang, S., Lieberwirth, I., Landfester, K., Munoz-Espi, R., & Crespy, D. (2017). Nanofibrous photocatalysts from electrospun nanocapsules. Nanotechnology. DOI: 10.1088/1361-6528/aa85f8

Jiang, S., He, W., Landfester, K., Crespy, D., & Mylon, S. E. (2017). The structure of fibers produced by colloid-electrospinning depends on the aggregation state of particles in the electrospinning feed. Polymer. DOI: 10.1016/j.polymer.2017.08.061

Hess, S. C., Stark, W. J., Mohn, D., Cohrs, N., Märsmann, S., Calcagni, M., … Buschmann, J. (2017). Gene expression in human adipose-derived stem cells: Comparison of 2D films, 3D electrospun meshes or co-cultured scaffolds with two-way paracrine effects. European Cells and Materials, 34, 232–248. DOI:10.22203/eCM.v034a15

Liverani, L., Boccardi, E., Beltrán, A. M., & Boccaccini, A. (2017). Incorporation of Calcium Containing Mesoporous (MCM-41-Type) Particles in Electrospun PCL Fibers by Using Benign Solvents. Polymers, 9(10), 487. DOI: 10.3390/polym9100487

Eslami Amirabadi, H., SahebAli, S., Frimat, J. P., Luttge, R., & den Toonder, J. M. J. (2017). A novel method to understand tumor cell invasion: integrating extracellular matrix mimicking layers in microfluidic chips by “selective curing.” Biomedical Microdevices, 19(4), 92. DOI: 10.1007/s10544-017-0234-8

Schwinté, P., Mariotte, A., Anand, P., Keller, L., Idoux-Gillet, Y., Huck, O., … Benkirane-Jessel, N. (2017). Anti-inflammatory effect of active nanofibrous polymeric membrane bearing nanocontainers of atorvastatin complexes. Nanomedicine, nnm-2017-0198. DOI: 10.2217/nnm-2017-0198

Cicala, G., Blanco, I., Latteri, A., Ognibene, G., Agatino Bottino, F., & Fragalà, M. (2017). PES/POSS Soluble Veils as Advanced Modifiers for Multifunctional Fiber Reinforced Composites. Polymers, 9(7), 281. DOI: 10.3390/polym9070281

Mollet, B. B., Spaans, S., Fard, P. G., Bax, N. A. M., Bouten, C. V. C., & Dankers, P. Y. W. (2017). Mechanically Robust Electrospun Hydrogel Scaffolds Crosslinked via Supramolecular Interactions. Macromolecular Bioscience, 1700053. DOI: 10.1002/mabi.201700053

Wang, Y., Yang, J., Du, R., & Chen, L. (2017). Transition Metal Ions Enable the Transition from Electrospun Prolamin Protein Fibers to Nitrogen-Doped Freestanding Carbon Films for Flexible Supercapacitors. ACS Applied Materials & Interfaces, 9(28), 23731–23740. DOI: 10.1021/acsami.7b05159

Al-Kattan, A., Nirwan, V. P., Munnier, E., Chourpa, I., Fahmi, A., Kabashin, A. V., … Timoshenko, V. Y. (2017). Toward multifunctional hybrid platforms for tissue engineering based on chitosan(PEO) nanofibers functionalized by bare laser-synthesized Au and Si nanoparticles. RSC Adv., 7(50), 31759–31766. DOI: 10.1039/C7RA02255G

Smeets, A., Clasen, C., & Van den Mooter, G. (2017). Electrospraying of polymer solutions: Study of formulation and process parameters. European Journal of Pharmaceutics and Biopharmaceutics, 119, 114–124. DOI: 10.1016/j.ejpb.2017.06.010

Kayarkatte, M. K., Delikaya, Ö., & Roth, C. (2017). Freestanding Catalyst Layers: A Novel Electrode Fabrication Technique for PEM Fuel Cells via Electrospinning. ChemElectroChem, 4(2), 404–411. DOI: 10.1002/celc.201600530

Kaltbeitzel, A., Friedemann, K., Turshatov, A., Schönecker, C., Lieberwirth, I., Landfester, K., & Crespy, D. (2017). STED Analysis of Droplet Deformation during Emulsion Electrospinning. Macromolecular Chemistry and Physics, 1600547. DOI: 10.1002/macp.201600547

Di Mauro, A., Fragalà, M. E., Privitera, V., & Impellizzeri, G. (2017). ZnO for application in photocatalysis: From thin films to nanostructures. Materials Science in Semiconductor Processing. DOI: 10.1016/j.mssp.2017.03.029

Tansaz, S., Liverani, L., Vester, L., & Boccaccini, A. R. (2017). Soy protein meets bioactive glass: electrospun composite fibers for tissue engineering applications. Materials Letters. Retrieved from DOI: 10.1016/j.matlet.2017.04.042

de Oliveira Santos, R. P., Rodrigues, B. V. M., Santos, D. M. dos, Campana-Filho, S. P., Ruvolo-Filho, A. C., & Frollini, E. (2017). Electrospun recycled PET-based mats: Tuning the properties by addition of cellulose and/or lignin. Polymer Testing. DOI: 10.1016/j.polymertesting.2017.04.023

Kluin, J., Talacua, H., Smits, A. I. P. M., Emmert, M. Y., Brugmans, M. C. P., Fioretta, E. S., … Bouten, C. V. C. (2017). In situ heart valve tissue engineering using a bioresorbable elastomeric implant – From material design to 12 months follow-up in sheep. Biomaterials. DOI: 10.1016/j.biomaterials.2017.02.007

Kendal A., Snelling S., Dakin S., Stace E., Mouthuy P.A. and Carr A.. (2017). Resorbable electrospun polydioxane fibers modify the behaviour of cells from both healthy and diseased human tendons. European Cells and Materials , 33, 169–182.

Grant, R., Hay, D., & Callanan, A. (2017). A novel drug induced hybrid electrospun PCL – cell derived ECM scaffold for liver tissue engineering. Tissue Engineering Part A, ten.TEA.2016.0419. DOI: 10.1089/ten.TEA.2016.0419

Kuchler-Bopp, S., Larrea, A., Petry, L., Idoux-Gillet, Y., Sebastian, V., Ferrandon, A., … Benkirane-Jessel, N. (2017). Promoting bioengineered tooth innervation using nanostructured and hybrid scaffolds. Acta Biomaterialia. DOI:10.1016/j.actbio.2017.01.001

T.D, D., Mohapatra, S., Nair, S. V., Nair, A. S., & Rai, A. K. (2017). Surfactant-assisted synthesis of porous TiO 2 nanofibers as an anode material for secondary lithium ion batteries. Sustainable Energy Fuels, 238, 37. DOI: 10.1039/C6SE00030D

He, W., Parowatkin, M., Mailaender, V., Flechtner-Mors, M., Ziener, U., Landfester, K., & Crespy, D. (2017). Sequence-Controlled Delivery of Peptides from Hierarchically Structured Nanomaterials. DOI: 10.1021/acsami.6b13176

Kuchler-Bopp, S., Larrea, A., Petry, L., Idoux-Gillet, Y., Sebastian, V., Ferrandon, A., … Benkirane-Jessel, N. (2017). Promoting bioengineered tooth innervation using nanostructured and hybrid scaffolds. Acta Biomaterialia. DOI: 10.1016/j.actbio.2017.01.001

Engel, A. B., Holade, Y., Cornu, D., Servat, K., Napporn, T. W., Kokoh, K. B., & Tingry, S. (2017). Optimization of Chitosan Film-Templated Biocathode for Enzymatic Oxygen Reduction in Glucose Hybrid Biofuel Cell. Journal of The Electrochemical Society, 164(2), G29–G35. DOI: 10.1149/2.0571702jes

Gangaja, B., Chandrasekharan, S., Vadukumpully, S., Nair, S. V., & Santhanagopalan, D. (2017). Surface chemical analysis of CuO nanofiber composite electrodes at different stages of lithiation/delithiation. Journal of Power Sources, 340, 356–364. DOI: 10.1016/j.jpowsour.2016.11.087

Keller, L., Idoux-Gillet, Y., Wagner, Q., Eap, S., Brasse, D., Schwinté, P., … Benkirane-Jessel, N. (2017). Nanoengineered implant as a new platform for regenerative nanomedicine using 3D well-organized human cell spheroids. International Journal of Nanomedicine, 12, 447–457. DOI: 10.2147/IJN.S116749

Sperling, L. E., Reis, K. P., Pozzobon, L. G., Girardi, C. S., & Pranke, P. (2017). Influence of random and oriented electrospun fibrous poly(lactic- co -glycolic acid) scaffolds on neural differentiation of mouse embryonic stem cells. Journal of Biomedical Materials Research Part A. DOI: 10.1002/jbm.a.36012

Publications 2016

Kayarkatte, M. K., Delikaya, Ö., & Roth, C. (2016). Freestanding Catalyst Layers: A novel electrode fabrication technique for PEM fuel cells via electrospinning. ChemElectroChem. DOI: 10.1002/celc.201600530

Nhat Nguyen, D., Clasen, C., & Van den Mooter, G. (2016). Encapsulating darunavir nanocrystals within Eudragit L100 using coaxial electrospraying. European Journal of Pharmaceutics and Biopharmaceutics. DOI: 10.1016/j.ejpb.2016.12.002

Bachtin, K., Kaus, M., Pfaffmann, L., Indris, S., Knapp, M., Roth, C., & Ehrenberg, H. (2016). Comparison of electrospun and conventional LiFePO4/C composite cathodes for Li-ion batteries. Materials Science and Engineering: B, 213, 98–104. DOI: 10.1016/j.mseb.2016.04.006

Bruni, G., Maggi, L., Tammaro, L., Lorenzo, R. Di, Friuli, V., D Aniello, S., … Marini, A. (2016). Electrospun fibers as potential carrier systems for enhanced drug release of perphenazine. International Journal of Pharmaceutics, 511(1), 190–197. DOI: 10.1016/j.ijpharm.2016.07.011

Cicala, G., Latteri, A., Mannino, S., Ognibene, G., & Blanco, I. (2016). Influence of Soluble Electrospun Co-Polyethersulfone Veils on Dynamic Mechanical and Morphological Properties of Epoxy Composites: Effect of Polymer Molar Mass. Advances in Polymer Technology. DOI: 10.1002/adv.21723

Di Mauro, A., Zimbone, M., Fragalà, M. E., & Impellizzeri, G. (2016). Synthesis of ZnO nanofibers by the electrospinning process. Materials Science in Semiconductor Processing, 42, 98–101. DOI: 10.1016/j.mssp.2015.08.003

Gladisch, J., Sarauli, D., Schäfer, D., Dietzel, B., Schulz, B., & Lisdat, F. (2016). Elektrogesponnene Polymerfasern als neuartiges Material für die Bioelektrokatalyse des Enzyms Pyrrolochinolinchinon-abhängige Glucosedehydrogenase. WISSENSCHAFTLICHE BEITRÄGE 2016, 15–21. DOI: 10.15771/0949-8214_2016_1_2

Jiang, S., Lv, L., Li, Q., Wang, J., Landfester, K., & Crespy, D. (2016). Tailoring nanoarchitectonics to control the release profile of payloads. Nanoscale, 8(22), 11511–11517. DOI: 10.1039/C6NR00917D

Lasseuguette, E., & Ferrari, M.-C. (2016). Development of microporous electrospun PIM-1 fibres. Materials Letters, 177, 116–119. DOI: 10.1016/j.matlet.2016.04.181

Riazi, K., Kübel, J., Abbasi, M., Bachtin, K., Indris, S., Ehrenberg, H., … Wilhelm, M. (2016). Polystyrene comb architectures as model systems for the optimized solution electrospinning of branched polymers. Polymer, 104, 240–250. DOI: 10.1016/j.polymer.2016.05.032

Russo, V., Tammaro, L., Di Marcantonio, L., Sorrentino, A., Ancora, M., Valbonetti, L., … Barboni, B. (2016). Amniotic epithelial stem cell biocompatibility for electrospun poly(lactide-co-glycolide), poly(ε-caprolactone), poly(lactic acid) scaffolds. Materials Science and Engineering: C, 69, 321–329. DOI: 10.1016/j.msec.2016.06.092

Shi, X., Chen, E.-X., Zhang, J., Zeng, H., & Chen, L. (2016). Fabrication of ultrathin conductive protein-based fibrous films and their thermal sensing properties. J. Mater. Chem. A, 4(13), 4711–4717.DOI: 10.1039/C5TA09645F

Unni, G. E., Deepak, T. G., & Sreekumaran Nair, A. (2016). Fabrication of CdSe sensitized SnO2 nanofiber quantum dot solar cells. Materials Science in Semiconductor Processing, 41, 370–377. DOI: 10.1016/j.mssp.2015.09.016

Unni, G. E., Sasi, S., & Nair, A. S. (2016). Higher open-circuit voltage set by cobalt redox shuttle in SnO2 nanofibers-sensitized CdTe quantum dot solar cells. Journal of Energy Chemistry, 25(3), 481–488. DOI: 10.1016/j.jechem.2016.02.008

Vashaghian, M., Ruiz-Zapata, A. M., Kerkhof, M. H., Zandieh-Doulabi, B., Werner, A., Roovers, J. P., & Smit, T. H. (2016). Toward a new generation of pelvic floor implants with electrospun nanofibrous matrices: A feasibility study. Neurourology and Urodynamics, 34(3), n/a-n/a. DOI: 10.1002/nau.22969

Formica, F. A., Öztürk, E., Hess, S. C., Stark, W. J., Maniura-Weber, K., Rottmar, M., & Zenobi-Wong, M. (2016). A Bioinspired Ultraporous Nanofiber-Hydrogel Mimic of the Cartilage Extracellular Matrix. Advanced Healthcare Materials. DOI: 10.1002/adhm.201600867

Gladisch, J., Sarauli, D., Schäfer, D., Dietzel, B., Schulz, B., & Lisdat, F. (2016). Towards a novel bioelectrocatalytic platform based on “wiring” of pyrroloquinoline quinone-dependent glucose dehydrogenase with an electrospun conductive polymeric fiber architecture. Scientific Reports, 6(October 2015), 19858. DOI: 10.1038/srep19858

Harito, C., Porras, R., Bavykin, D. V., & Walsh, F. C. (2016). Electrospinning of in situ and ex situ synthesized polyimide composites reinforced by titanate nanotubes. Journal of Applied Polymer Science. DOI: 10.1002/app.44641

Huang, W., Wang, Y., Chen, C., Law, J. L. M., Houghton, M., & Chen, L. (2016). Fabrication of flexible self-standing all-cellulose nanofibrous composite membranes for virus removal. Carbohydrate Polymers, 143, 9–17. DOI: 10.1016/j.carbpol.2016.02.011

Jiang, S., Ma, B. C., Reinholz, J., Li, Q., Wang, J., Zhang, K. A. I., … Crespy, D. (2016). Efficient Nanofibrous Membranes for Antibacterial Wound Dressing and UV Protection. ACS Applied Materials & Interfaces, 8(44), 29915–29922. DOI: 10.1021/acsami.6b09165

Muylaert, D. E. P., van Almen, G. C., Talacua, H., Fledderus, J. O., Kluin, J., Hendrikse, S. I. S., … Verhaar, M. C. (2016). Early in-situ cellularization of a supramolecular vascular graft is modified by synthetic stromal cell-derived factor-1α derived peptides. Biomaterials, 76, 187–195. DOI: 10.1016/j.biomaterials.2015.10.052

Nguyen, D. N., Palangetic, L., Clasen, C., & Van den Mooter, G. (2016). One-step production of darunavir solid dispersion nanoparticles coated with enteric polymers using electrospraying. Journal of Pharmacy and Pharmacology, 68(5), 625–633. DOI: 10.1111/jphp.12459

Shi, X., Chen, E.-X., Zhang, J., Zeng, H., & Chen, L. (2016). Fabrication of ultrathin conductive protein-based fibrous films and their thermal sensing properties. J. Mater. Chem. A, 4(13), 4711–4717. DOI: 10.1039/C5TA09645F

Tudisco, C., Fragalà, M. E., Giuffrida, A. E., Bertani, F., Pinalli, R., Dalcanale, E., … Condorelli, G. G. (2016). Hierarchical Route for the Fabrication of Cavitand-Modified Nanostructured ZnO Fibers for Volatile Organic Compound Detection. The Journal of Physical Chemistry C, 120(23), 12611–12617. DOI: 10.1021/acs.jpcc.6b03502

van Almen, G. C., Talacua, H., Ippel, B. D., Mollet, B. B., Ramaekers, M., Simonet, M., … Dankers, P. Y. W. (2016). Development of Non-Cell Adhesive Vascular Grafts Using Supramolecular Building Blocks. Macromolecular Bioscience, 16(3), 350–362. DOI: 10.1002/mabi.201500278

Vashaghian, M., Zandieh-Doulabi, B., Roovers, J.-P., & Smit, T. H. (2016). Electrospun Matrices for Pelvic Floor Repair: Effect of Fiber Diameter on Mechanical Properties and Cell Behavior. Tissue Engineering Part A, ten.tea.2016.0194. DOI: 10.1089/ten.tea.2016.0194

Wagner, Q., Offner, D., Idoux-Gillet, Y., Saleem, I., Somavarapu, S., Schwinté, P., … Keller, L. (2016). Advanced nanostructured medical device combining mesenchymal cells and VEGF nanoparticles for enhanced engineered tissue vascularization. Nanomedicine, 11(18), 2419–2430. DOI: 10.2217/nnm-2016-0189

Publications 2015

Alberti, A., Bongiorno, C., Pellegrino, G., Sanzaro, S., Smecca, E., Condorelli, G. G., … La Magna, A. (2015). Low temperature sputtered TiO 2 nano sheaths on electrospun PES fibers as high porosity photoactive material. RSC Adv., 5(90), 73444–73450. DOI 10.1039/C5RA13153G

Brugmans, M. C. P., Sӧntjens, S. H. M., Cox, M. a. J., Nandakumar, A., Bosman, A. W., Mes, T., … Driessen-Mol, A. (2015). Hydrolytic and oxidative degradation of electrospun supramolecular biomaterials: In vitro degradation pathways. Acta Biomaterialia, 27, 21–31. DOI: 10.1016/j.actbio.2015.08.034

Eap, S., Keller, L., Schiavi, J., Huck, O., Jacomine, L., Fioretti, F., … Benkirane-Jessel, N. (2015). A living thick nanofibrous implant bifunctionalized with active growth factor and stem cells for bone regeneration. International Journal of Nanomedicine, 10, 1061–75. DOI: 10.2147/IJN.S72670

Putti, M., Simonet, M., Solberg, R., & Peters, G. W. M. (2015). Electrospinning poly(ε-caprolactone) under controlled environmental conditions: Influence on fiber morphology and orientation. Polymer, 63, 189–195. DOI: 10.1016/j.polymer.2015.03.006

Rodrigues, B. V. M., Ramires, E. C., Santos, R. P. O., & Frollini, E. (2015). Ultrathin and nanofibers via room temperature electrospinning from trifluoroacetic acid solutions of untreated lignocellulosic sisal fiber or sisal pulp. Journal of Applied Polymer Science, 132(16), n/a-n/a. DOI: 10.1002/app.41826

Santos, R. P. O., Rodrigues, B. V. M., Ramires, E. C., Ruvolo-Filho, A. C., & Frollini, E. (2015). Bio-based materials from the electrospinning of lignocellulosic sisal fibers and recycled PET. Industrial Crops and Products, 72, 69–76. DOI: 10.1016/j.indcrop.2015.01.024

Argento, G., de Jonge, N., Söntjens, S. H. M., Oomens, C. W. J., Bouten, C. V. C., & Baaijens, F. P. T. (2015). Modeling the impact of scaffold architecture and mechanical loading on collagen turnover in engineered cardiovascular tissues. Biomechanics and Modeling in Mechanobiology, 14(3), 603–613. DOI: 10.1007/s10237-014-0625-1

Aubert, T., Palangetic, L., Mohammadimasoudi, M., Neyts, K., Beeckman, J., Clasen, C., & Hens, Z. (2015). Large-Scale and Electroswitchable Polarized Emission from Semiconductor Nanorods Aligned in Polymeric Nanofibers. ACS Photonics, 2(5), 583–588. DOI: 10.1021/acsphotonics.5b00068

Bruni, G., Maggi, L., Tammaro, L., Canobbio, A., Di Lorenzo, R., D’aniello, S., … Marini, A. (2015). Fabrication, Physico-Chemical, and Pharmaceutical Characterization of Budesonide-Loaded Electrospun Fibers for Drug Targeting to the Colon. Journal of Pharmaceutical Sciences, 104(11), 3798–3803. DOI: 10.1002/jps.24587

Di Mauro, A., & Fragalà, M. E. (2015). Electrospun SiO2 “necklaces” on unglazed ceramic tiles: a planarizing strategy. Superlattices and Microstructures, 81, 265–271. DOI: 10.1016/j.spmi.2015.01.027

Di Mauro, A., Zimbone, M., Scuderi, M., Nicotra, G., Fragalà, M. E., & Impellizzeri, G. (2015). Effect of Pt Nanoparticles on the Photocatalytic Activity of ZnO Nanofibers. Nanoscale Research Letters, 10(1), 484. DOI: 10.1186/s11671-015-1126-6

Gugerell, A., Neumann, A., Kober, J., Tammaro, L., Hoch, E., Schnabelrauch, M., … Keck, M. (2015). Adipose-derived stem cells cultivated on electrospun l-lactide/glycolide copolymer fleece and gelatin hydrogels under flow conditions – aiming physiological reality in hypodermis tissue engineering. Burns, 41(1), 163–171. DOI: 10.1016/j.burns.2014.06.010

Keller, L., Wagner, Q., Offner, D., Eap, S., Musset, A.-M., Arruebo, M., … Benkirane-Jessel, N. (2015). Integrating Microtissues in Nanofiber Scaffolds for Regenerative Nanomedicine. Materials, 8(10), 6863–6867. DOI: 10.3390/ma8105342

Morand, D.-N., Huck, O., Keller, L., Jessel, N., Tenenbaum, H., & Davideau, J.-L. (2015). Active Nanofibrous Membrane Effects on Gingival Cell Inflammatory Response. Materials, 8(10), 7217–7229. DOI: 10.3390/ma8105376

Murase, S. K., Lv, L.-P., Kaltbeitzel, A., Landfester, K., del Valle, L. J., Katsarava, R., … Crespy, D. (2015). Amino acid-based poly(ester amide) nanofibers for tailored enzymatic degradation prepared by miniemulsion-electrospinning. RSC Adv., 5(68), 55006–55014. DOI: 10.1039/C5RA06267E

Nandan, S., Deepak, T. G., Nair, S. V., & Nair, A. S. (2015). TiO 2 nanofibers resembling “yellow bristle grass” in morphology by a soft chemical transformation. Dalton Trans., 44(20), 9637–9645. DOI: 10.1039/C5DT01027F

Nikhil, A., Anjusree, G. S., Nair, S. V., & Nair, A. S. (2015). Visible light-induced photocatalytic activity of high surface area N-doped two-dimensional (2-D) TiO 2 sheets. RSC Adv., 5(107), 88464–88470. DOI: 10.1039/C5RA15086H

Sorkio, A., Porter, P. J., Juuti-Uusitalo, K., Meenan, B. J., Skottman, H., & Burke, G. A. (2015). Surface Modified Biodegradable Electrospun Membranes as a Carrier for Human Embryonic Stem Cell-Derived Retinal Pigment Epithelial Cells. Tissue Engineering Part A, 21(17–18), 2301–2314. DOI: 10.1089/ten.tea.2014.0640

Valarezo, E., Tammaro, L., Malagón, O., González, S., Armijos, C., & Vittoria, V. (2015). Fabrication and Characterization of Poly(lactic acid)/Poly(ε-caprolactone) Blend Electrospun Fibers Loaded with Amoxicillin for Tunable Delivering. Journal of Nanoscience and Nanotechnology, 15(6), 4706–4712. DOI: 10.1166/jnn.2015.9726

Wang, Y., Yang, J., & Chen, L. (2015). Convenient Fabrication of Electrospun Prolamin Protein Delivery System with Three-Dimensional Shapeability and Resistance to Fouling. ACS Applied Materials & Interfaces, 7(24), 13422–13430. DOI: 10.1021/acsami.5b02129

Publications 2014

Ajalloueian, F., Lim, M. L., Lemon, G., Haag, J. C., Gustafsson, Y., Sjöqvist, S., … Macchiarini, P. (2014). Biomechanical and biocompatibility characteristics of electrospun polymeric tracheal scaffolds. Biomaterials, 35(20), 5307–5315. DOI: 10.1016/j.biomaterials.2014.03.015

Ballotta, V., Driessen-Mol, A., Bouten, C. V. C., & Baaijens, F. P. T. (2014). Strain-dependent modulation of macrophage polarization within scaffolds. Biomaterials, 35(18), 4919–4928. DOI: 10.1016/j.biomaterials.2014.03.002

de Jonge, N., Foolen, J., Brugmans, M. C. P., Söntjens, S. H. M., Baaijens, F. P. T., & Bouten, C. V. C. (2014). Degree of Scaffold Degradation Influences Collagen (re)Orientation in Engineered Tissues. Tissue Engineering Part A, 20(11–12), 1747–1757. DOI:10.1089/ten.tea.2013.0517

Deepak, T. G., Anjusree, G. S., Pai, K. R. N., Subash, D., Nair, S. V., & Nair, A. S. (2014). Cabbage leaf-shaped two-dimensional TiO2 mesostructures for efficient dye-sensitized solar cells. RSC Advances, 4(51), 27084.DOI: 10.1039/c4ra04828h

Fioretta, E. S., Simonet, M., Smits, A. I. P. M., Baaijens, F. P. T., & Bouten, C. V. C. (2014). Differential Response of Endothelial and Endothelial Colony Forming Cells on Electrospun Scaffolds with Distinct Microfiber Diameters. Biomacromolecules, 15(3), 821–829. DOI: 10.1021/bm4016418

Joe, D., Golling, F. E., Friedemann, K., Crespy, D., Klapper, M., & Müllen, K. (2014). Anisotropic Supports in Metallocene-Catalyzed Polymerizations: Templates to Obtain Polyolefin Fibers. Macromolecular Materials and Engineering, 299(10), 1155–1162. DOI: 10.1002/mame.201300435

Jungebluth, P., Haag, J. C., Sjöqvist, S., Gustafsson, Y., Rodríguez, A. B., Del Gaudio, C., … Macchiarini, P. (2014). Tracheal tissue engineering in rats. Nature Protocols, 9(9), 2164–2179. DOI: 10.1038/nprot.2014.149

Palangetic, L., Reddy, N. K., Srinivasan, S., Cohen, R. E., McKinley, G. H., & Clasen, C. (2014). Dispersity and spinnability: Why highly polydisperse polymer solutions are desirable for electrospinning. Polymer, 55(19), 4920–4931. DOI: 10.1016/j.polymer.2014.07.047

Ragesh, P., Nair, S. V., & Nair, A. S. (2014). An attempt to fabricate a photocatalytic and hydrophobic self-cleaning coating via electrospinning. RSC Advances, 4(73), 38498. DOI: 10.1039/C4RA06444E

Ballotta, V., Smits, A. I. P. M., Driessen-Mol, A., Bouten, C. V. C., & Baaijens, F. P. T. (2014). Synergistic protein secretion by mesenchymal stromal cells seeded in 3D scaffolds and circulating leukocytes in physiological flow. Biomaterials, 35(33), 9100–9113. DOI: 10.1016/j.biomaterials.2014.07.042

Daranarong, D., Chan, R. T. H., Wanandy, N. S., Molloy, R., Punyodom, W., & Foster, L. J. R. (2014). Electrospun Polyhydroxybutyrate and Poly(L-lactide- co – ε -caprolactone) Composites as Nanofibrous Scaffolds. BioMed Research International, 2014, 1–12. DOI: 10.1155/2014/741408

Daranarong, D., Thapsukhon, B., Wanandy, N. S., Molloy, R., Punyodom, W., & Foster, L. J. R. (2014). Application of low loading of collagen in electrospun poly[(l-lactide)- co -(ε-caprolactone)] nanofibrous scaffolds to promote cellular biocompatibility. Polymer International, 63(7), 1254–1262. DOI: 10.1002/pi.4631

Deepak, T. G., Subash, D., Anjusree, G. S., Pai, K. R. N., Nair, S. V., & Nair, A. S. (2014). Photovoltaic Property of Anatase TiO2 3-D Mesoflowers. ACS Sustainable Chemistry & Engineering, 2(12), 2772–2780. DOI: 10.1021/sc500642c

Eap, S., Bécavin, T., Keller, L., Kökten, T., Fioretti, F., Weickert, J.-L., … Kuchler-Bopp, S. (2014). Nanofibers Implant Functionalized by Neural Growth Factor as a Strategy to Innervate a Bioengineered Tooth. Advanced Healthcare Materials, 3(3), 386–391. DOI: 10.1002/adhm.201300281

Nieuwland, M., Geerdink, P., Brier, P., van den Eijnden, P., Henket, J. T. M. M., Langelaan, M. L. P., … Martin, A. H. (2014). Reprint of “Food-grade electrospinning of proteins.” Innovative Food Science & Emerging Technologies, 24, 138–144. DOI: 10.1016/j.ifset.2014.07.006

Palangetic, L., Reddy, N. K., Srinivasan, S., Cohen, R. E., McKinley, G. H., & Clasen, C. (2014). Dispersity and spinnability: Why highly polydisperse polymer solutions are desirable for electrospinning. Polymer, 55(19), 4920–4931. DOI: 10.1016/j.polymer.2014.07.047

Smits, A. I. P. M., Ballotta, V., Driessen-Mol, A., Bouten, C. V. C., & Baaijens, F. P. T. (2014). Shear flow affects selective monocyte recruitment into MCP-1-loaded scaffolds. Journal of Cellular and Molecular Medicine, 18(11), 2176–2188. DOI: 10.1111/jcmm.12330

Wang, Y., & Chen, L. (2014). Cellulose Nanowhiskers and Fiber Alignment Greatly Improve Mechanical Properties of Electrospun Prolamin Protein Fibers. ACS Applied Materials & Interfaces, 6(3), 1709–1718. DOI: 10.1021/am404624z

Xu, X., Zhou, J., Jiang, L., Lubineau, G., Payne, S. A., & Gutschmidt, D. (2014). Lignin-based carbon fibers: Carbon nanotube decoration and superior thermal stability. Carbon, 80, 91–102. DOI: 10.1016/j.carbon.2014.08.042

Yoganarasimha, S., Trahan, W. R., Best, A. M., Bowlin, G. L., Kitten, T. O., Moon, P. C., & Madurantakam, P. A. (2014). Peracetic Acid: A Practical Agent for Sterilizing Heat-Labile Polymeric Tissue-Engineering Scaffolds. Tissue Engineering Part C: Methods, 20(9), 714–723. DOI: 10.1089/ten.tec.2013.0624

Publications 2013

Mammen, L., Papadopoulos, P., Friedemann, K., Wanka, S., Crespy, D., Vollmer, D., & Butt, H.-J. (2013). Transparent and airtight silica nano- and microchannels with uniform tubular cross-section. Soft Matter, 9(41), 9824. DOI: 10.1039/c3sm51082d

Reddy, N. K., Palangetic, L., Stappers, L., Buitenhuis, J., Fransaer, J., & Clasen, C. (2013). Metallic and bi-metallic Janus nanofibers: electrical and self-propulsion properties. Journal of Materials Chemistry C, 1(23), 3646. DOI: 10.1039/c3tc30176a

Xu, X., Zhou, J., Jiang, L., Lubineau, G., Chen, Y., Wu, X.-F., & Piere, R. (2013). Porous core-shell carbon fibers derived from lignin and cellulose nanofibrils. Materials Letters, 109, 175–178. DOI: 10.1016/j.matlet.2013.07.082

Publications 2012

Argento, G., Simonet, M., Oomens, C. W. J., & Baaijens, F. P. T. (2012). Multi-scale mechanical characterization of scaffolds for heart valve tissue engineering. Journal of Biomechanics, 45(16), 2893–2898. JOUR. DOI: 10.1016/j.jbiomech.2012.07.037

Pabittei, D. R., Heger, M., Simonet, M., van Tuijl, S., van der Wal, A. C., Beek, J. F., … de Mol, B. A. (2012). Biodegradable polymer scaffold, semi-solid solder, and single-spot lasing for increasing solder-tissue bonding in suture-free laser-assisted vascular repair. Journal of Tissue Engineering and Regenerative Medicine, 6(10), 803–812. DOI: 10.1002/term.486

Russo, G., Peters, G. W. M., & Solberg, R. H. M. (2012). Preparation and characterization of mesh membranes using electrospinning technique. In 6TH INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS (TOP) AND COMPOSITES (Vol. 1459, pp. 232–234). AIP Publishing. DOI: 10.1063/1.4738453

Publications 2011

Pabittei, D. R., Heger, M., Beek, J. F., van Tuijl, S., Simonet, M., van der Wal, A. C., … Balm, R. (2011). Optimization of Suture-Free Laser-Assisted Vessel Repair by Solder-Doped Electrospun Poly(ε-caprolactone) Scaffold. Annals of Biomedical Engineering, 39(1), 223–234. DOI: 10.1007/s10439-010-0157-5

How can we assist you?

+31 40 282 7956